DPS-801R4H-20FB FEC 8 TON SLIM LINE SSlimline Series Servo Press

Description

DPS-801R4H-20FB FEC enFORCE
SLIM LINE SERIES (DPS) SERVO PRESS -
8 Ton
Brand:
FEC
Part No
: DPS-801R4H-20FB
Condition:
New In Box
Description:
Servo Press With Cables -
the DSP, Controller and C-frames are available as a custom bundle.
Slim Line Series
The Slim Line Servo Press Series is designed for close center-to-center pressing applications where presses must be mounted next to each other or a smaller     footprint is required.  30-40% smaller and up to 70% lighter than the DPT series, the Slimline series features belt drive for quiet operation and simple     connection to the servo controller.  Maintenance brakes come standard on the Slimline series.
Standard stroke for both Fitting and Bonding presses is 200mm. 100mm and 300mm strokes available upon request.
FITTING TYPE
(Holding time generally < 1sec)
Part Number
Max. Load
(kN / Tonne)
Continuous Load
(kN / Tonne)
Max. Speed
(mm / sec)
Length
(mm / in)
Width
(mm / in)
Height
(mm / in)
Weight
(kg / lbs)
DPS-801R4H-20FB
80.0 / 8.16
18.0 / 1.83
120
817 / 32.2
135 / 5.3
375 / 14.8
98 / 216
1  Special High Power model for extended holding.
******Optional Controller and DSP - NOT INCLUDED IN THIS LISTING - BUNDLE PRICING AVAILABLE
DSP1500 SAN4 SERVO PRESS CONTROLLER
Three controller models cover the full range of press sizes. As a result of miniaturized circuit technology, the compact units maintain a maximum width of 123.5mm (largest model) in spite of the built in power source and servo amplifier. All 3 controllers are back panel mountable and feature the following:
Isolated Gate Bipolar Technology (IGBT).
Fully Digital System (eliminates analog potentiometers).
32 different work parameters (part programs) that can be stored into Flash ROM. No battery backup required.
External communication is available through (2) RS-485 ports. Connecting a group of up to 31 press controllers is also possible through this port when communicating using the DSP User Console Software.
A hot-swappable Display Module is available for viewing result data and can be used to program individual controllers. The RS-232 version can output single press ASCII data to a serial device.
MAIN UNIT CONTROLLER
The Main Unit is a complimentary controller device to enhance the DSP1500 capabilities by providing the data communication and sequence control features for single and multiple (up to 31) press applications. The use of the Main Unit reduces valuable engineering, start-up and debug time by allowing full sequencing functionality & press data to be handled independently of an outside controller (PLC). Additionally, all Input / Output functions are assumed by the Main Unit for all connected presses while also allowing use of a multiple of standard Fieldbus Interfaces.
Optional fieldbus capabilities for: Ethernet I/P, Allen Bradley Remote I/O®, DeviceNet®, Interbus-S®, Profibus®, CC-Link® and Modbus Plus® are available eliminating hard wired I/O thus reducing debug & start-up costs. Additionally, Ethernet I/P, CC-Link® & DeviceNet® technologies allow transfer of resultant press data across the same communication link as the I/O.
******C-frame presses provide numerous advantages compared to other presses. Some of these benefits include:
Easy access.
A C-frame press has three access points to the working area, allowing for easier die maintenance and adjustments. The multiple access points also allow part loading from the left, right, or front of the cell.
Affordable.
C-frame presses are more cost-effective than straight-side presses, helping reduce the production line’s overall cost.
Optimized space.
With a narrow frame, C-frame presses take up less floor space and provide minimal stroke deflection.
Shipping:
Shipped via. Freight, We will Pallet the items but the buyer is responsible for ALL shipping Costs.
Please Contact us if you Have any Questions.